22 June 2013
17 June 2013
14 June 2013
11 June 2013
I cut this ring from the chine of a 19th century scythe blade.
I cold forged this to the desired thickness. This kind of old iron blackens easily- a good contrast to the 18k gold ball.
My method for making the ball (you can just buy them):
-calculate volume of gold req'd
-melt gold into a round cavity in a charcoal block
-attach this resulting crude sphere to a brass rod
-fasten rod in drill (voila: rudimentary lathe)
-turn on drill and file the sphere to perfection as it spins. Then cut off the rod.
-It looks a bit 'hard' and 'perfect' at this stage. To soften the perfection, I then rolled the sphere round and round between two marble slabs imparting a nice stone texture.
A little olde world scythe inspiration:
6 June 2013
3 June 2013
Gold and lapis lazuli beads.
Ur, souther Iraq. c.2600-2400BC
Diadem. Southern Italy. c.250-200 BC.
Gold with lapis lazuli.This diffusion-bonded ornamentation is very tiny!
Note twisty wires (stone rolled), granulation (little balls) and
the mark-out scribe-lines on the substrate. A mix of crude and virtuoso!
Raymond Templier 1934
Brooch. White gold, glass, lapis lazuli.
Marco Zanini, 1983
Ring. Gold, coral and lapis lazuli
Plinth, Lapis lazuli (or is it blue marble?). Musei Capitolini.
Roman(?) I assume gold and lapis lazuli (?)
Amazing flatness and patina to modulate the rich colours.
Following the lessons;
Keep it simple, let the gold and lapis lazuli do the work...
~Here, little ring I made for someone (their design),
she has much daintier and better-looking fingers I'm sure!
Gold and lapis lazuli.